Azure Load the Registry

Because air-gapped environments do not have direct access to the Internet, you must download, extract and load several required images to your local container registry, before installing DKP.

If desired, environments that are non-air-gapped can also perform the follow steps to use a local registry for speed and security reasons.

Load Images into your Registry

This page assumes you have already downloaded and extracted the bundle from the Prerequisites. The sections below explain further how you are pushing the images to your registry and then using them in creating a cluster.

Download all Images for Air-gapped Deployments

If you are operating in an air-gapped environment, a local container registry containing all the necessary installation images, including the Kommander images is required. See below for prerequisites to download and then how to push the necessary images to this registry.

Connectivity with clusters attaching to the management cluster is required:

Both management and attached clusters must be able to connect to the local registry.
The management cluster must be able to connect to all attached cluster’s API servers.
The management cluster must be able to connect to any load balancers created for platform services on the management cluster.

Extract Air-gapped Images and Set Variables

Follow these steps to extract the air-gapped image bundles into your private registry:

Assuming you have downloaded dkp-air-gapped-bundle_v2.8.1_linux_amd64.tar.gz , extract the tarball to a local directory:
CODE
```
tar -xzvf dkp-air-gapped-bundle_v2.8.1_linux_amd64.tar.gz
```
The directory structure after extraction can be accessed in subsequent steps using commands to access files from different directories. EX: For the bootstrap, change your directory to the dkp-<version> directory similar to example below depending on your current location:
CODE
```
cd dkp-v2.8.1
```

Set an environment variable with your registry address:

CODE

export REGISTRY_URL="<https/http>://<registry-address>:<registry-port>"
export REGISTRY_USERNAME=<username>
export REGISTRY_PASSWORD=<password>

REGISTRY_URL: the address of an existing local registry accessible in the VPC that the new cluster nodes will be configured to use a mirror registry when pulling images.
NOTE: Other local registries may use the options below:
- JFrog - CONTAINER_REGISTRY_CA: (optional) the path on the bastion machine to the registry CA. This value is only needed if the registry is using a self-signed certificate and the AMIs are not already configured to trust this CA.
- CONTAINER_REGISTRY_USERNAME: optional, set to a user that has pull access to this registry.
- CONTAINER_REGISTRY_PASSWORD: optional if username is not set.

Load Images to your Private Registry - Konvoy

Before creating or upgrading a Kubernetes cluster, you need to load the required images in a local registry if operating in an air-gapped environment. This registry must be accessible from both the bastion machine and either the AWS EC2 instances or other machines that will be created for the Kubernetes cluster.

If you do not already have a local registry set up, refer to Local Registry Tools page for more information.

Execute the following command to load the air-gapped image bundle into your private registry:

CODE

dkp push bundle --bundle ./container-images/konvoy-image-bundle-v2.8.1.tar --to-registry=${REGISTRY_URL} --to-registry-username=${REGISTRY_USERNAME} --to-registry-password=${REGISTRY_PASSWORD}

It may take some time to push all the images to your image registry, depending on the performance of the network between the machine you are running the script on and the registry.

Load Images to your Private Registry - Kommander

Load Kommander images to your Private Registry

For the air-gapped kommander image bundle, run the command below:

Run the following command to load the image bundle:

CODE

dkp push bundle --bundle ./container-images/kommander-image-bundle-v2.8.1.tar --to-registry=${REGISTRY_URL} --to-registry-username=${REGISTRY_USERNAME} --to-registry-password=${REGISTRY_PASSWORD}

Load Images to your Private Registry - DKP Catalog Applications

Optional: This step is required only if you have an Enterprise license.

For DKP Catalog Applications, also perform this image load:

Run the following command to load the dkp-catalog-applications image bundle into your private registry:

CODE

dkp push bundle --bundle ./container-images/dkp-catalog-applications-image-bundle-v2.8.1.tar --to-registry=${REGISTRY_URL} --to-registry-username=${REGISTRY_USERNAME} --to-registry-password=${REGISTRY_PASSWORD}

For more information to set up a private registry with a registry mirror, see this page for details on using that flag.

Next Topic

Azure HTTP Proxy