External LDAP directory

Connect your Konvoy cluster to an external LDAP directory

How to connect Konvoy to an external LDAP directory

This guide shows how to configure your Konvoy cluster so that users can log in with the credentials stored in an external LDAP directory service.

Step 1: build Dex LDAP connector config

The first step is to build a Dex LDAP connector configuration document adjusted to the specific directory at hand. Because each LDAP directory is set up in its own special way this step is non-trivial. The most important resource is the Dex LDAP connector reference documentation, available here.

Note: For Konvoy’s Dex it is important to build a proper userSearch configuration. groupSearch, however, does not need to be configured for the time being.

Step 2: modify Konvoy cluster.yaml

Modify your Konvoy cluster’s main configuration file cluster.yaml for adding the Dex LDAP connector configuration from step 1. See below for an example (in this example, we are configuring the Konvoy cluster to connect to the FreeIPA demo directory):

    - name: dex
      enabled: true
      values: |
          - type: ldap
            id: ldap
            name: FreeIPA Demo1 (LDAP directory)
              host: ipa.demo1.freeipa.org:636
              insecureSkipVerify: true
              bindDN: uid=manager,cn=users,cn=accounts,dc=demo1,dc=freeipa,dc=org
              bindPW: Secret123
                baseDN: cn=accounts,dc=demo1,dc=freeipa,dc=org
                filter: "(objectClass=posixAccount)"
                username: uid
                idAttr: uid
                emailAttr: mail

Note: The value for the LDAP connector name parameter (here: FreeIPA Demo1 (LDAP directory)) will appear on one of the login buttons in the Konvoy user interface (choose an expressive name).

Also note that for demoing purposes the configuration shown above uses insecureSkipVerify: true. In production, the LDAP communication should be protected with properly configured transport layer security (TLS).

Step 3: reconfigure the Konvoy cluster

If you already have a Konvoy cluster running please re-configure Dex in that cluster. Running konvoy up again should achieve that goal. If that does not take effect then do a konvoy reset followed by another konvoy up.

Step 4: log in

Visit https://<your-cluster-host>/token and initiate a login flow. On the login page choose the Log in with <ldap-name> button. Enter the LDAP credentials, and log in.

Debugging help

It is likely that the Dex LDAP connector configuration is not quite right from the start. In that case you need to be able to debug the problem and iterate on it. The Dex log output contains helpful error messages as indicated by the following examples.

Errors upon Dex startup

If the Dex configuration fragment provided in the Konvoy cluster.yaml results in an invalid Dex config then Dex will not properly start up. In that case the Dex logs will provide error details:

kubectl logs -f dex-kubeaddons-66675fcb7c-snxb8  -n kubeaddons --kubeconfig=admin.conf
error parse config file /etc/dex/cfg/config.yaml: error unmarshaling JSON: parse connector config: illegal base64 data at input byte 0

One symptom of Dex not starting up is that https://<cluster>/ops/landing throws a 5xx HTTP error response after timing out.

Errors upon login

Most problems with the Dex LDAP connector configuration will become apparent only upon a login attempt. A login failing as of misconfiguration will result in an error page showing only Internal Server Error and Login error.

The root cause can then usually be found by reading the Dex log, as shown in the following example:

kubectl logs -f dex-kubeaddons-5d55b6b94b-9pm2d  -n kubeaddons --kubeconfig=admin.conf
time="2019-07-29T13:03:57Z" level=error msg="Failed to login user: failed to connect: LDAP Result Code 200 \"Network Error\": dial tcp: lookup freeipa.example.com on no such host"

Here, the directory’s DNS name was misconfigured and it should be easy to address that problem.

A more difficult problem is when a login through Dex via LDAP fails because Dex was not able to unambiguously find the specified user in the directory. One reason for that can be an invalid LDAP user search configuration. Example error message in the Dex log:

time="2019-07-29T14:21:27Z" level=info msg="performing ldap search cn=users,cn=compat,dc=demo1,dc=freeipa,dc=org sub (&(objectClass=posixAccount)(uid=employee))"
time="2019-07-29T14:21:27Z" level=error msg="Failed to login user: ldap: filter returned multiple (2) results: \"(&(objectClass=posixAccount)(uid=employee))\""

Solving problems like this requires to carefully review the structure of the directory (which can be very different from directory setup to directory setup), and to then carefully assemble a user search configuration matching the directory structure.

Notably, with some directories it can be hard to generally distinguish the cases “properly configured, and user not found” (login fails in an expected way) and “not properly configured, and therefore user not found” (login fails in an unexpected way).

Example for successful login

For comparison, these are log lines emitted by Dex upon successful login:

time="2019-07-29T15:35:51Z" level=info msg="performing ldap search cn=accounts,dc=demo1,dc=freeipa,dc=org sub (&(objectClass=posixAccount)(uid=employee))"
time="2019-07-29T15:35:52Z" level=info msg="username \"employee\" mapped to entry uid=employee,cn=users,cn=accounts,dc=demo1,dc=freeipa,dc=org"
time="2019-07-29T15:35:52Z" level=info msg="login successful: connector \"ldap\", username=\"\", email=\"employee@demo1.freeipa.org\", groups=[]"